How to install curl on raspberry pi4/17/2023 ![]() The final task is to set up WireGuard so that it will work on other client devices as well. This completes the installation of WireGuard on Raspberry Pi. Step 21: Press Enter to confirm the reboot. Step 20: Choose the “Yes” option to reboot your device. Step 19: The next screen confirms the successful installation of WireGuard on Raspberry Pi. Step 18: Enable the unattended upgrades by choosing the “Yes” option and press Enter. Step 17: Select OK on the unattended upgrade screen. Step 16: The process will generate a server key that WireGuard requires. Step 15: There are two ways to access the WireGuard VPN but here we are sticking with accessing it through a public IP address. Step 14: Provide your DNS provider as CloudFlare which is relatively fast as compared to others. Step 13: Confirm the port setting by choosing the “Yes” option and press Enter. Step 12: In this step, keep the WireGuard port number same as recommended by the installer and press Enter. Step 11: Select the VPN service as “WireGuard” and press Enter. Step 10: Select “pi” as a user and press Enter. Step 9: In this step, you will need to choose a local user so press the “Enter” key to continue. ![]() ![]() Step 8: Press Enter by ignoring the warning that appears in the next on-screen. If this information is correct, press Enter on the “Yes” option. Step 7: To set the static IP address, the installation script will use the current network setting as default. Step 6: In this step, you will need to choose the “No” option as you haven’t used DHCP reservation and you will have to set a static IP address by yourself in the next step. ![]() Step 5: The next screen will explain why your Raspberry Pi must have a static IP address, Press Enter to move to the next screen. Step 4: When you run the above script, you will see the first screen greeted with the message as shown below. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |